HP StorageWorks Simple SAN Connection Manager user guide (5697-0083, August 2009)

HP StorageWorks Simple SAN Connection Manager user guide 65
Creating an IPsec association
To create an IPsec association:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (Figure 38) and lists the existing IPsec Associations on the left
and the existing IPsec Policies on the right.
Figure 38 IPsec Configuration dialog box
2. Under IPsec Associations, click Create.
The IPsec Association dialog box opens (Figure 39). You must complete all fields prefaced by a red
asterisk.
NOTE: Simple SAN Connection Manager allows you to create a maximum of 512 IPsec
associations.