HP StoreEver MSL6480 Tape Library User and Service Guide Addendum (QU625-96016, October 2013)

Configuring the encryption key manager type
The Configuration > Encryption screen displays the available data encryption key manager types
along with the status of each type. Only one encryption manager type can be configured for the
library at a time and it will be used for all tape drives and partitions.
To change the configured encryption key manager, select the key manager and then click Submit.
Configuring use of the MSL Encryption Kit
The Configuration > Encryption > USB — MSL Encryption Kit screen displays information about the
token and provides access to enter the token PIN, and configure a new token. Access to this screen
is only available to the security user.
For additional information on using the MSL Encryption Kit, see the HP StoreEver MSL Encryption
Kit User Guide on the HP Business Support website: http://www.hp.com/support/manuals.
NOTE: Only one encryption method is allowed at a time and it is used for the entire library. If
the ESKM is active, the MSL Encryption Kit will not be used.
Entering the token PIN
Figure 1 Entering the token PIN
1. Navigate to the Configuration > Encryption > USB — MSL Encryption Kit screen.
2. Verify that the correct token is available.
3. Enter the Token PIN and then click Submit.
Configuring use of the MSL Encryption Kit 7