HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)
Table Of Contents
- User and Service Guide
- Contents
- 1 Features and overview
- Library options
- Interface specifications and requirements for parallel SCSI drives
- Interface specifications and requirements for Fibre Channel drives
- Interface specifications and requirements for SAS drives
- LTO-4 and later generation tape drives and encryption
- Logical libraries
- Control path and data path failover
- Front panel overview
- Back panel overview
- Tape drive back panel overviews
- Tape drive power indicator
- Controller health status indicator
- Power supply back panel (MSL4048, MSL8084, and MSL8096)
- 2 Installing the library
- Preparing the host
- Planning the parallel SCSI configuration
- Planning the SAS configuration
- Planning the Fibre Channel configuration
- Choosing a location
- Unpacking the shipping container
- Identifying product components
- Removing the shipping lock
- Mounting the device in a rack
- Installing the tabletop conversion kit
- Installing tape drives
- Installing a redundant power supply
- Changing the SCSI address (parallel SCSI drives only)
- Connecting the parallel SCSI cable (parallel SCSI devices only)
- Connecting the Fibre Channel cables (Fibre Channel devices only)
- Connecting the SAS cable (SAS devices only)
- Powering on the device
- Configuring the device
- Verifying the connection
- Labeling and loading the tape cartridges
- Verifying the installation
- Configuring additional features
- 3 Tape cartridges and magazines
- 4 Operating the tape library
- Remote management interface (RMI)
- Overview
- Login
- Status pane
- Getting help
- Identity
- Status
- Configuration
- Changing the system configuration
- Changing the drive configuration
- Changing the network configuration
- Configuration: Network Management
- Changing the administrator password
- Setting the date and time
- Setting error log mode
- Setting event notification parameters
- Saving and restoring the device configuration and restoring factory defaults
- Operations
- Support
- MSL2024 Operator control panel (OCP)
- LED indicators
- Library home screen
- Operator control panel buttons
- Understanding the menu structure
- Unlocking the mailslot (Unlock Mailslot)
- Status/Information
- Configuration
- Configuring logical libraries (Status/Information > Set Logical Libraries)
- Changing the administrator password (Configuration > Change Admin Password)
- Setting the number of reserved slots (Configuration > Set Reserved Slot Count)
- Configuring the mailslot (Configuration > Configure Mailslot)
- Bar code reporting format (Configuration > Barcode Format Reporting)
- Changing the SCSI address — parallel SCSI devices (Configuration> Change Drive)
- Changing the drive configuration — Fibre Channel devices (Configuration > Change Drive)
- Setting the master drive (Configuration > Set Master Drive)
- Setting behaviors (Configuration > Library behavior)
- Setting the date and time (Configuration > Library Date/Time)
- Configuring network settings (Configuration > Configure Network Settings)
- Configuring automatic cleaning (Configuration > Configure Auto Cleaning)
- Restoring factory defaults (Configuration > Restore Defaults)
- Saving and restoring the library configuration (Configuration > Save/Restore Configuration)
- Operations
- Unlocking, removing, and replacing magazines (Operations > Unlock Left or Right Magazine)
- Cleaning a tape drive (Operations> Clean Drive)
- Moving tapes in the library (Operations > Move Tape)
- Updating tape cartridge inventory (Operations > Perform Inventory)
- Rebooting the library (Operations> Reboot library)
- Enabling password locks (Operations > Enable Library Password Locks)
- Support
- Powering a drive on or off (Support > Power On/Off Drives)
- Running the demonstration (Support > Run Demo)
- Running the slot to slot test (Support > Run Slot To Slot Test)
- Running the wellness test (Support > Run Wellness Test)
- Upgrading firmware (Support > Library FW Upgrade, Support > Drive FW Upgrade)
- Viewing logs (Support > Library Error Log)
- Downloading a support ticket (Support > Download Support Ticket)
- Forcing the drive to eject a tape (Support > Force Drive To Eject Tape)
- MSL4048, MSL8048, and MSL8096 operator control panel
- Overview
- Using the OCP
- Illustrated menu option and navigation examples
- Info menu
- Configuration menu
- Changing the number of logical libraries (Configuration > Logical Libraries)
- Changing the library configuration (Configuration > Library)
- Changing the drive configuration (Configuration > Drives)
- Changing the network configuration (Configuration > Network)
- Barcode reporting format (Configuration > Barcode Reporting)
- Setting and changing the administrator password (Configuration> Set Admin Password)
- Restore defaults (Configuration > Restore Defaults)
- Setting the library date and time (Configuration > Set Date and Time)
- Saving and restoring the library configuration (Configuration> Save/Restore)
- Operations menu
- Support menu
- Powering drives on and off (Support > Power on/off Drives)
- Cleaning the tape drive (Support > Clean Drive)
- Running tests (Support > Run Tests)
- Viewing logs (Support > View Logs)
- Updating library and drive firmware (Support > FW Upgrade)
- Force ejecting a drive (Support > Force Drive Eject)
- Downloading a support ticket (Support > Support Ticket)
- Rebooting the tape library (Support > Reboot)
- Remote management interface (RMI)
- 5 Troubleshooting
- Detection problems after installing a parallel SCSI device
- Detection problems after installing a SAS device
- Fibre Channel connection problems
- Operation problems
- Performance problems
- Service and repair
- The wellness test
- Error codes
- Warning events
- Configuration change events
- Information events
- Using HP Library & Tape Tools to diagnose problems
- 6 Upgrading and servicing the tape library
- Possible tools needed
- Installing a new tape drive
- Removing and replacing a tape drive
- Removing and replacing a magazine
- Installing a redundant power supply (MSL4048, MSL8048, and MSL8096 only)
- Replacing the power supply (MSL4048, MSL8048, and MSL8096)
- Replacing the library controller (MSL4048, MSL8048, and MSL8096)
- Removing and replacing the base chassis
- 7 Support and other resources
- 8 Documentation feedback
- A Technical specifications
- B Regulatory information
- C Electrostatic discharge
- Glossary
- Index
O
OCP
administrator password
MSL2024, 103
MSL4048, MSL8048, and MSL8096, 127
functions
MSL2024, 100
MSL4048, MSL8048, and MSL8096, 123
library status
MSL4048, MSL8048, and MSL8096, 125
menu, 126
MSL2024, 103
MSL4048, MSL8048, and MSL8096, 126
navigation buttons
MSL4048, MSL8048, and MSL8096, 124
operations
cleaning tape drives
MSL2024, 116
MSL4048, MSL8048, and MSL8096, 139
RMI, 99
enabling password locks
MSL2024, 118
MSL4048, MSL8048, and MSL8096, 138
moving tapes
MSL2024, 117
MSL4048, MSL8048, and MSL8096, 129
RMI, 95
rebooting
MSL2024, 118
MSL4048, MSL8048, and MSL8096, 141
RMI, 98
replacing magazines
MSL2024, 115
MSL4048, MSL8048, and MSL8096, 137
RMI, 95
unlocking magazines
MSL2024, 115
MSL4048, MSL8048, and MSL8096, 137
RMI, 95
updating inventory
MSL2024, 117
MSL4048, MSL8048, and MSL8096, 138
RMI, 95
P
parallel SCSI cabling, 144
parallel SCSI host adapter
requirements, 14
troubleshooting, 145
parallel SCSI multiple LUN support, 14
parallel SCSI requirements, 14
parallel SCSI troubleshooting
backup application, 145
compatibility, 145
device driver, 145
termination, 146
parts
proper handling, 223
storing, 223
transporting, 223
password
default, 66
password locks
enabling
MSL2024, 118
MSL4048, MSL8048, and MSL8096, 138
preventing electrostatic damage, 223
R
rebooting
MSL2024, 118
MSL4048, MSL8048, and MSL8096, 141
RMI, 98
regulatory compliance
identification numbers, 222
regulatory information, 222
Turkey RoHS material content declaration, 222
Ukraine RoHS material content declaration, 222
remote management interface, 64
repairing
removing stuck tapes, 149
reseller
HP, 218
restore defaults
MSL2024, 114
MSL4048, MSL8048, and MSL8096, 135
RMI, 64
S
SAS cabling, 146
SAS host adapter
troubleshooting, 147
SAS troubleshooting
backup application, 147
compatibility, 147
device driver, 147
shipping lock, 45, 214
SNMP
configuring, 88
Specifications
environmental, 220
physical, 220
regulatory, 221
static-dissipating work mat, 223
static-safe containers
storing products, 223
transporting products, 223
straps, ground
boot, 223
heel, 223
toe, 223
Subscriber's Choice, HP, 218
support
cleaning tape drives
MSL2024, 116
MSL4048, MSL8048, and MSL8096, 139
RMI, 99
downloading a support ticket
229