HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)

Figure 59 RMI login page
The Account Types are:
• User — no password is required (leave the password box blank).
• Administrator — the administrator password is required. The same administrator password is
used for the RMI and OCP. There is not a default administrator password; the administrator
password must be set with the OCP before it can be used with the RMI. If the administrator
password is lost, contact HP to generate a temporary password that will grant administrator
access.
• Service —access to this level is by HP Service personnel only. The service password is set at
the factory. The same service password is used for the RMI and OCP.
The user login provides access to the Identity and Status options, but not the Configuration,
Operations, and Support options. Administrator level provides access to all screens except for the
Log configuration and HP Service screens.
TIP: By default, the administrator password is unset; all of the digits are null. You must set the
administrator password from the OCP to protect the administrator functions on the OCP and enable
the administrator functions in the RMI.
Status pane
The System Status pane (see Figure 60 (page 67)) shows the current device and drive status. The
System Status pane for the MSL4048, MSL8048, and MSL8096 also shows the power supply
status.
66 Operating the tape library