HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)

Figure 67 Identity: Network page
You can see, but not modify:
• MAC Address — a unique identifier for the library controller network interface
• Full Qualified Domain Name — the fully qualified domain name for the device
• Clock Synchronization Configuration (SNTP) — When Enabled, the device will obtain the
current time and date from the configured SNTP server.
When IPv4 Addressing is Enabled, you can see, but not modify:
• IPv4 DNS Server 1 and IPv4 DNS Server 2 — addresses of the configured DNS servers used
when DHCP Addressing is not Enabled.
• DHCPv4 Addressing — When Enabled, the device will request an IP address from a DHCP
server each time the device is booted.
• IPv4 Address — the library network address
• Subnet Mask — The network mask of the library controller used when DHCP Addressing is
not Enabled.
• Default Gateway — the gateway used when DHCP Addressing is not Enabled.
When IPv6 Addressing is Enabled, you can see, but not modify:
• Stateless Addressing — when Enabled, the device will generate an address for itself based
on the routing information obtained from a router advertisement and the MAC address. The
device can manage up to five global addresses at the same time, which can be assigned from
different routers.
• DHCPv6 Addressing — when Enabled, the library will request an IP address from a DHCP
server each time the device is booted.
• Static Addressing — when Enabled, the device will use a statically-configured address.
• Static Assigned Address — the IPv6 address when Static Addressing Enabled is On.
Remote management interface (RMI) 73