HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)

Figure 80 Configuration: Network Management page
You may change the:
• SNMP Enabled — When checked, the device can be managed by computers listed in the
SNMP Target IP Addresses field.
• SNMP Target IP Addresses — the IP addresses for up to three computers running IPv4 SNMP
management software and up to three computers running IPv6 SNMP management software.
IP addresses will not be cleared if SNMP is disabled, but those targets will no longer be able
to manage the library and will not receive traps from the library. You can select the SNMP
version for each target address.
Remote management interface (RMI) 89