HP StorageWorks MSL2024 Tape Library firmware release notes Firmware version 4.
Legal and notice information © Copyright 2008 Hewlett-Packard Development Company, L.P.
Version: 4.20 Description This release includes updated firmware for the HP StorageWorks MSL2024 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Library firmware version • 4.20 Update recommendation Recommended Supersedes All previous versions of Library firmware.
• Fixed a rare condition when the OCP would continue to show <-Close Mailslot when the mailslot was closed. Pressing the front panel buttons would not cause a change in the display. • The Library now displays the message Encryption kit not available due to incompatible library hardware. Please contact HP service on the remote management interface Configuration: Security screen when it detects one of the few chassis that do not support the HP StorageWorks 1/8 G2 and MSL Encryption Kit.
6. Press Next until the screen displays the filename of the Autoloader firmware file on the USB drive. Press Enter to select the firmware file. 7. If the upgrade failed, press Enter to display the error code and message describing the cause of the failure. 8. When the upgrade is complete, remove the USB flash drive from the USB port. Determining current version To find the version of firmware installed on the Library from the RMI, see the Support: Firmware screen.
