HP StorageWorks MSL8096 Tape Library firmware release notes Version 9.
Description This release includes updated firmware for the HP StorageWorks MSL8048 and MSL8096 Tape Libraries. The Library firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP). • HP Library and Tape Tools (L&TT). Library firmware version • 9.60 Update recommendation Supersedes Recommended All earlier versions of Library firmware. Product models All HP StorageWorks MSL8048 and MSL8096 Tape Libraries.
Improved encryption key backup The Backup feature for Encryption Keys located in the Security section of the RMI has been enhanced to allow selection of the token’s most recently added keys to be stored in the backup file. Previous versions only allow storing of all keys on the encryption token to the backup file. Added encryption token firmware display The RMI Status Security screen now reports encryption token firmware version number. Fixes Fixes in version 9.
by properly initializing each library’s drives after encountering the Extender Missing 8B 40 error condition. RMI not responding in case "Dump Log" or "Save Service Dump" button was selected several times RMI was not responding in case the Dump Log or Save Service Dump button on the RMI - Support Library logs page was selected several times. This problem has been corrected by modifying these RMI buttons to only be selected one time for each case.
Installation instructions To upgrade firmware from the RMI: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. 2. Log into the RMI as the administrator user. 3. In the Support: Firmware page, browse to the location of the Library firmware file. 4. Click Update. To upgrade firmware from the OCP using a USB flash drive: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.
