HP StorageWorks MSL4048 Tape Library firmware release notes Firmware version 6.
Legal and notice information © Copyright 2009 Hewlett-Packard Development Company, L.P.
Version: 6.80 Description This release includes updated firmware for the HP StorageWorks MSL4048 Tape Library. The firmware can be updated through any of the following methods: • Remote management interface (RMI). • Operator control panel (OCP) using a USB flash drive. • HP Library and Tape Tools (L&TT). Library firmware version 6.80 Compatible robotics firmware version Update recommendation Supersedes 2.70e Recommended All previous versions of Library firmware.
was displayed. This issue was introduced by firmware version 6.70 and is corrected by version 6.80. • Fixed a case where System Error D7 23 could be returned during a drive firmware upgrade when the final package from the download file was not a full package. • Fixed a case where loading a tape cartridge into the Library resulted in an error message when the Library did not fully insert the cartridge in the tape drive. In version 6.70, an F4 98 Drive Load Timeout error was reported.
1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage. 2. Log into the RMI as the administrator user. 3. In the Support: Firmware page, browse to the location of the Library firmware file. 4. Click Update. To upgrade firmware from the OCP using a USB flash drive: 1. Download current firmware using HP Library & Tape Tools or from the HP support website: http:/ /www.hp.com/support/storage.
