HP StorageWorks MSL2024 Tape Library firmware release notes: Firmware version 5.00 (AK378-96035, September 2010)
Version: 5.00
Description
This release includes updated firmware for the HP StorageWorks MSL2024 Tape Library.
The firmware can be updated through any of the following methods:
• Remote management interface (RMI).
• Operator control panel (OCP) using a USB flash drive.
• HP Library and Tape Tools (L&TT).
Library firmware version 5.00
Compatible robotics firmware version 3.00e
Update recommendation Recommended
Supersedes All previous versions of Library firmware.
Product models
All HP StorageWorks MSL2024 Tape Libraries
Languages
• English (American)
• English (International)
Enhancements
• Added support for the Ultrium 3000 Fibre Channel tape drive
• Added support for Simple Network Time Protocol (SNTP) configuration in the RMI.
• Added support for IPv6 networking configuration through Command View TL.
• Improved support for browsers which use KHTML, such as Chrome, Safari, and Konqueror.
• A support ticket is now generated after a cleaning tape is unloaded.
• Added a configuration to the RMI Configuration: Password page to allow the current administrator
login session to remain logged in without user interaction for up to 30 minutes.
Fixes
• Fixed a case when the RMI incorrectly reported the status of an LTO5 HH SAS drive that had ne-
gotiated to 6 Gb as 4.5 Gb.
• Modified robotic parameters to avoid retries reported as gripper blocked (error codes 8E 44 and
9C 44).
• Fixed a case where the Library appears unresponsive after an OCP key is pressed during initial-
ization after a reboot or power cycle.
HP StorageWorks MSL2024 Tape Library firmware release notes 3