HP StoreEver MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and Service Guide (AK378-96059, December 2012)

Operations
Moving media
Use the Operations: Move Media page to move tape cartridges within the device.
IMPORTANT: Moving media manually can interfere with backup software operations. Ensure
backups are complete before moving media.
Figure 86 Operations: Move Media page
To move a tape, select the source and destination and then click the Move button in the center of
the screen to start the move.
Updating the current media inventory
Use the Operations: Inventory page to have the device re-scan the tapes to update the media
inventory.
Figure 87 Operations: Inventory page
Releasing and replacing the magazines
Use the Operations: Magazine page to release the left, right, or both magazines. When you click
Release, the device will unlock the magazine and display Left Magazine Unlocked or Right Magazine
Unlocked on the OCP screen. Once the magazines are unlocked, you can remove any of the
magazines on that side. If you do not remove the magazine within a few seconds, the device will
lock it. When you replace the magazine, the device will inventory the magazine's tape cartridges.
Remote management interface (RMI) 95