HP StorageWorks U320e SCSI Host Bus Adapter user guide (AH627-96001, March 2007)
4Configuration tool
The HP StorageWorks U320e SCSI Host Bus Adapter ships with the latest firmware installed and
configuration set to work in m ost installations. Use the AT TO Config uration To ol to see information about
installed adapters, drivers and devices, and change NVRAM settings on the adapter.
This program exec utes under:
• Windows® XP/2000/Server 2003
• Linux® 2.4 and 2.6 kernels
The ATTO Configuration Tool disp lays:
• The names of HP StorageWorks U320e SCSI Host Bus Adapters and other ATTO adapters installed in
the system.
• Information about the drivers controlling the adapters, including version information for both the
currently executing driver and the flash image.
• Information about the devices attached to the HP StorageWorks U320e SCSI Host Bus Adapter and
ATTO adapters
NOTE:
The factory settings on the HP StorageWorks U320e SCSI Host Bus Adapter should provide excellent
performance for a wide range of applications. However, some applications may benefitfrom
modification of the adapter NVRAM settings that tune the adapter for a specificperformancerange.
Installing the ATTO Configuration Tool
To install the ATTO Configuration Tool from the product CD:
NOTE:
TheversionontheproductCDmaybeolderthantheversiononthewebsite. PleasechecktheHP
website for newer versions.
1. Load the product CD into the computer. The CD will display an HTML page.
2. Click th e arrow next to Utilities in the Extras section.
3. On Windows, double-click win_app_configtool_308.exe. Follow the instructions in the
installer to finish the installation.
4. On Linux, double-click lnx_app_configtool_308.bin. If the executable bit is not set, run sh
</path/to/bin>.
To install the ATTO Configuration Tool from the HP website:
1. Download the ATTO Configuration Tool from h
ttp://www.hp.com/s upport/u 320e to y our filesystem.
2. Navigate to the downloaded file.
3. Double-click the downloaded file to start the installer. Follow the instructions in the installer to finish
the installation.
User guide
25