HP StorageWorks U320e SCSI Host Bus Adapter user guide (AH627-96001, March 2007)

Using the Configuration Tool
NOTE:
The HP StorageWorks U320e SCSI Host Bus Adapter is designed to operate properly using factory
settings. Entering invalid or incorrect settings when using an NVRAM configuration utilit y, such as the
ATTO Configuration Tool, may cause your host adapter to function incorrectly.
CAUTION:
Back up system data before installing or changing hardware configurations.
To start the Configuration Tool:
1. Locate the application icon in the folder you created during installation.
2. Double-click the icon to start the application.
Themainscreenhasthreewindows:Device Listing, Configuration Options,andStatus.
Navigating t
he ATTO Configuration Tool
Theleftside
of the Device Listing window lists a ll devices currently connected to the system.
• Expandthedevicetreebyclickingthe+ to reveal additional detail on connected devices.
• Collapse the branch by clicking the –.
Information and options for a device highlighted in the device listing are p resented in the Configuration
Options win
dow in the right window pane.
The currently selected device determines the tabs and panels shown in the Device Listing.TheTable 3
specifies the tabs that display for the each device type.
Table 3 Tabs displayed by device type
Tree Node Tabs displayed
Adapter
Basic Info,
Flash, Advanced
Channel
NVRAM, PCI info
SCSI Devices
Basic Info
Local Host
Basic Info
The followi
ng tabs display in the Configuration Options window when you select a specific adapter
in the Device Listing window:
• The Basic Info tab provides basic information about the device currently highlighted in the device
listing; no changes are possible from this screen or information about the host when the Local
Host is hi
ghlighted.
• The Flash tab p rovides information about the current revision of the flash firmware loaded on the
highlighted host adapter.
Click the Browse button at the bottom of the tab to search for new flash files on your system. Flash files
have filen
ames of the form FlashBundle_2004_02_20.21P.
• The Advanced tab is not supported for the HP StorageWorks U320e SCSI Host Bus Adapter
and will display a message.
When you select a specific channel under an HP StorageWorks U320e SCSI Host Bus Adapter or ATTO
host ada
pter in the Device Listing, the NVRAM panel displays the NVR AM parameters applicable
26
Configuration tool