HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)
14 MIB-II (RFC1213-MIB)
System group
All systems must implement the System group. If an agent is not configured to have a value for any of the
System group variables, a string of length 0 is returned.
sysDescr
OID 1.3.6.1.2.1.1.1
Description A textual description of the entity. This value should include the full name and version of
the hardware type, software operating system, and networking software, in printable
ASCII characters only.
Note The default value is Fibre Channel Switch. Set this value using the agtCfgSet command.
sysObjectID
OID 1.3.6.1.2.1.1.2
Description The vendor’s authoritative identification of the network management subsystem contained
in the entity.
This value is allocated within the SMI enterprises subtree (1.3.6.1.4.1). It provides an
easy and unambiguous way to determine what kind of object is being managed.
For example, if vendor ABC, Inc. is assigned the subtree 1.3.6.1.4.1.4242, it could
assign the identifier 1.3.6.1.4.1.4242.1.1 to its ABC Router.
Note The default value is
iso.org.dod.internet.private.enterprises.bcsi.commDev.fibrechannel.fcSwitch.sw.
sysUpTime
OID 1.3.6.1.2.1.1.3
Description The time (in hundredths of a second) since the network management portion of the system
was last reinitialized.
sysContact
OID 1.3.6.1.2.1.1.4
Description The textual identification of the contact person for this managed node, together with
information on how to contact this person.
Note The default value is Field Support. Set this value using the agtCfgSet command.
sysName
OID 1.3.6.1.2.1.1.5
Description An administratively assigned name for this managed node. By convention, this is the
node’s fully qualified domain name.
Note The default value is preassigned name of the switch. The length of the sysName object
should be equal or less than 19 characters.
sysLocation
OID 1.3.6.1.2.1.1.6
Description The physical location of this node (for example, telephone closet, third floor).
Note The default value is End User Premise. Set this value using the agtcfgset command.