HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

22 FibreAlliance MIB objects
Connectivity group
All systems must implement the Connectivity group.
uNumber
OID 1.3.6.1.3.94.1.1
Description The number of connectivity units on this system (represented by this agent). Can be a
count of the boards in a chassis or the number of full boxes in a rack.
Note The connectivity unit is mapped to a switch. The uNumber is always set to 1.
FcAddressId Octet string of size 3 The Port Identifier for this entry in the SNS table.
FcEventSeverity Integer 1 (unknown): Unknown status.
2 (emergency): Emergency status.
3 (alert): Alert status.
4 (critical): Critical status.
5 (error): Error status.
6 (warning): Warning status.
7 (notify): Notification status.
8 (info): Informational status.
9 (debug): Debug status.
10 (mark): All messages logged.
FcUnitType Integer 1 (unknown): Unknown unit type.
2 (other): None of 3–14.
3 (hub): Passive connectivity unit supporting loop protocol.
4 (switch): Active connectivity unit supporting multiple protocols.
5 (gateway): Unit that not only converts the interface, but also encapsulates
the frame into another protocol. The assumption is that there are always two
gateways connected together, for example, FC to ATM.
6 (converter): Unit that converts from one interface to another, for example, FC
to SCSI.
7 (hba): Host bus adapter.
8 (proxy-agent): Software proxy agent.
9 (storage-device): Disk, CD, tape, and so on.
10 (host): Host computer.
11 (storage-subsystem): RAID, library, and so on.
12 (module): Subcomponent of a system.
13 (swdriver): Software driver.
14 (storage-access-device): Provides storage management and access for
heterogeneous hosts and heterogeneous devices.
Table 3 FCMGMT-MIB Definitions (continued)
Type definition Value Description