HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)
26 FibreAlliance MIB objects
connUnitUrl
OID 1.3.6.1.3.94.1.6.1.10
Description The URL to use to launch a management application, if applicable. Otherwise, this is an
empty string. In a standalone unit, this is the same as the top-level URL. This has the same
definition as systemURL for keywords.
Note Provides the virtual IP address of the switch as a URL
(for example: http://10.114.63.74/).
connUnitDomainId
OID 1.3.6.1.3.94.1.6.1.11
Description The 24-bit Fibre Channel address ID of this connectivity unit, right-justified, using leading
0s, if required. If this value is not applicable, all bits are set to 1.
Note This is set to the switch domain ID (as per FC-SW).
connUnitProxyMaster
OID 1.3.6.1.3.94.1.6.1.12
Description A value of 3 (yes) means that this is the proxy master unit for a set of managed units.
Possible values are:
1 (unknown)
2 (no)
3 (yes)
Example This could be the only unit with a management card in it for a set of units. A standalone
unit returns 3 (yes) for this object.
Note This is set to 3 (yes).
connUnitPrincipal
OID 1.3.6.1.3.94.1.6.1.13
Description Indicates whether this connectivity unit is the principal unit within the group of fabric
elements. If this variable is not applicable, the value is 1 (unknown). Possible values are:
1 (unknown)
2 (no)
3 (yes)
Note If the switch is principal, this is set to 3 (yes); otherwise, it is set to 2 (no).
connUnitNumRevs
OID 1.3.6.1.3.94.1.6.1.17
Description The number of revisions in the connUnitRevsTable.
Note Always returns a value of 1.
connUnitModuleId
OID 1.3.6.1.3.94.1.6.1.19
Description This is a unique ID, persistent between boots, that can be used to group a set of
connUnits together into a module. The intended use is to create a connUnit with a
connUnitType of module to represent a physical or logical group of connectivity units.
As a result, the value of the group is set to the value of connUnitId for this container
connUnit.
The connUnitModuleId should be 0s if this connUnit is not part of a module.
Note This is set to the WWN of the switch.