HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

XPath OS 7.4.x MIB reference guide 27
connUnitName
OID 1.3.6.1.3.94.1.6.1.20
Description A display string containing a name for this connectivity unit. This object value should be
persistent between boots.
Note This is set to switchName/sysName. The length of the connUnitName object should be
equal to or less than 19 characters.
connUnitInfo
OID 1.3.6.1.3.94.1.6.1.21
Description A display string containing information about this connectivity unit. This object value
should be persistent between boots.
Note This is set to sysDescr and read-write.
connUnitControl
OID 1.3.6.1.3.94.1.6.1.22
Description Controls the addressed connUnit. Each implementation can allow all or none of the
following possible values on a SET:
Cold start and warm start are as defined in MIB-II and are not meant to be a factory
reset.
Note This always returns 2 (invalid) and cannot be set.
connUnitContact
OID 1.3.6.1.3.94.1.6.1.23
Description Contact information for this connectivity unit.
Note This is the same as sysContact.
connUnitLocation
OID 1.3.6.1.3.94.1.6.1.24
Description Location information for this connectivity unit.
Note This displays the same value as sysLocation.
connUnitEventFilter
OID 1.3.6.1.3.94.1.6.1.25
Description This value defines the event severity logged by this connectivity unit. All events of severity
less than or equal to connUnitEventFilter are logged in connUnitEventTable.
Note Returns warning.
1 (unknown) Default value upon rebooting.
2 (invalid) Not applicable.
3 (resetConnUnitColdStart) Reboot. Performs a switch reboot.
4 (resetConnUnitWarmStart Fastboot. The addressed unit performs a warm
start reset.
5 (offlineConnUnit) Disable switch. The addressed unit puts itself into
an implementation-dependent offline state.
6 (onlineConnUnit) Enable switch. The addressed unit puts itself into
an implementation-dependent online state.