HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

XPath OS 7.4.x MIB reference guide 29
connUnitPortType
OID 1.3.6.1.3.94.1.10.1.3
Description The port type. Possible values are:
1 (unknown)
2 (other)
3 (not-present)
4 (hub-port)
5 (n-port) End port for fabric.
6 (l-port) End port for loop.
7 (fl-port) Public loop.
8 (f-port) Fabric port.
9 (e-port) Fabric expansion port.
10 (g-port) Generic fabric port.
11 (domain-ctl) Domain controller.
12 (hub-controller)
13 (scsi) Parallel SCSI port.
14 (escon)
15 (lan)
16 (wan)
17 (ac) AC power line.
18 (dc) DC power line.
19 (ssa) Serial storage architecture.
Note connUnitPortType is mapped as follows:
U_Port = 10 (g-port)
F_Port = 8 (f-port)
FL_Port = 7 (fl-port)
E_Port = 9 (e-port)
Ex_Port, Loopback, iSCSI and VE_Ports return the value 2 (other).
connUnitPortFCClassCap
OID 1.3.6.1.3.94.1.10.1.4
Description Bit mask that specifies the class-of-service capability of this port. If this is not applicable,
all bits are set to 0.
The bits have the following definitions:
0 unknown
1class-f
2class-one
4class-two
8class-three
16 class-four
32 class-five
64 class-six
connUnitPortFCClassOp
OID 1.3.6.1.3.94.1.10.1.5
Description Bit mask that specifies the classes of service currently operating. If this is not applicable,
all bits are set to 0. This object has the same definition as connUnitPortFCClassCap.
Note For an F_Port or FL_Port, this value is 0x0C. For a G_Port or E_Port, this value is 0x0D.
For an iSCSI port this value is 0x008.