HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

30 FibreAlliance MIB objects
connUnitPortState
OID 1.3.6.1.3.94.1.10.1.6
Description The state of the port hardware. Possible values are:
1 (unavailable) Do not use.
2 (online) Available.
3 (offline) Not available.
4 (bypassed) No longer used.
5 (diagnostics) Map to your testing.
Note For an E_Port, F_Port, or FL_Port, the value is 2 (online). For a U_Port, the value is 3
(offline) (disabled, testing, or faulted).
connUnitPortStatus
OID 1.3.6.1.3.94.1.10.1.7
Description An overall protocol status for the port. If the value of connUnitPortStatus is not online,
then it is reported as unknown. Possible values are:
1 (unknown) Unknown status.
2 (unused) Device cannot report this status.
3 (ready) FCAL Loop or FCPH Link reset protocol initialization has
completed.
4 (warning) Do not use.
5 (failure) Do not use.
6 (notparticipating) Loop not participating and does not have a loop address.
7 (initializing) Protocol is proceeding.
8 (bypass) Do not use.
9 (ols) FCP offline status.
Note For an E_Port, F_Port, or FL_ Port, the value is 3 (ready).
connUnitPortTransmitterType
OID 1.3.6.1.3.94.1.10.1.8
Description The technology of the port transceiver. Possible values are:
1 (unknown)
2 (other)
3 (unused)
4 (shortwave)
5 (longwave)
6 (copper)
7 (scsi)
8 (longwaveNoOFC)
9 (shortwaveNoOFC)
10 (longwaveLED)
11 (ssa)
Note For an external FC_Port, this value should be 4 (shortwave), 6 (copper), or 8
(longwaveNoOFC).