HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

XPath OS 7.4.x MIB reference guide 31
connUnitPortModuleType
OID 1.3.6.1.3.94.1.10.1.9
Description The module type of the port connector. Possible values are:
1 (unknown)
2 (other)
3 (gbic)
4 (embedded)
5 (glm)
6 (gbicSerialId)
7 (gbicNoSerialId)
8 (gbicNotInstalled)
9 (smallFormFactor)
Note For an external FC_Port with GBIC, this value should be 6 (gbicSerialId).
connUnitPortWwn
OID 1.3.6.1.3.94.1.10.1.10
Description The World Wide Name of the port, if applicable; otherwise, an empty string.
This is in IEEE Extended format; the extension contains the internal port number of each
port.
Note The internal port number is 1 less than the port index. For example, if the switch has
WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN
20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively; however, the
embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch.
connUnitPortFCId
OID 1.3.6.1.3.94.1.10.1.11
Description This is the assigned Fibre Channel ID of this port. This value is expected to be a Big
Endian value of 24 bits. If this is a loop, then it is the ALPA that is connected. If this is an
E_Port, then it contains only the domain ID, left justified and zero filled. If this port does
not have a Fibre Channel address, all bits are set to 1.
Note It displays the following value for all the ports: domainID PortNumber 00(For example:64
01 00)
connUnitPortSn
OID 1.3.6.1.3.94.1.10.1.12
Description The serial number of the unit (for example, for an SFP). If this is not applicable, returns an
empty string.
Note If the SFP has a serial ID, the return value is the SFP part number; otherwise, it returns a
value of unknown.
connUnitPortRevision
OID 1.3.6.1.3.94.1.10.1.13
Description The port revision (for example, for an SFP).
Note If the SFP has a serial ID, this returns the SFP revision number; otherwise, it returns a
value of unknown.