HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

32 FibreAlliance MIB objects
connUnitPortVendor
OID 1.3.6.1.3.94.1.10.1.14
Description The port vendor (for example, for an SFP).
Note If the SFP has a serial ID, this returns the SFP vendor name; otherwise, it returns a value of
unknown.
connUnitPortSpeed
OID 1.3.6.1.3.94.1.10.1.15
Description The speed of the port, in kilobytes per second.
Note The valid values for an HP StorageWorks MP Router are 2,097,152 and 1,048,576
KB/sec.
connUnitPortControl
OID 1.3.6.1.3.94.1.10.1.16
Description This object is used to control the addressed connUnit’s port.
Note Each implementation may choose not to allow any or all of these values on a SET.
Currently, this variable returns the value invalid (2).
connUnitPortName
OID 1.3.6.1.3.94.1.10.1.17
Description A string describing the addressed port.
Note This object can be set for HP StorageWorks switches.
connUnitPortPhysicalNumber
OID 1.3.6.1.3.94.1.10.1.18
Description This is the internal port number by which this port is known. In many implementations,
this should be the same as connUnitPortIndex. Some implementations might have an
internal port representation that is not compatible with the rules for table indices; in that
case, provide the internal representation of this port in this object. This value can also be
used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the
connUnitLinkTable.
Note The internal port numbers for the MP Routers are 0 through maximum number of ports.
connUnitPortProtocolCap
OID 1.3.6.1.3.94.1.10.1.20
Description This is the bit mask that specifies the driver-level protocol capability of this port. If this is
not applicable, all bits are set to 0. The return value is 0x 7F.
The bits have the following definitions:
0 = unknown
1 = Loop
2 = Fabric
4 = SCSI
8 = TCP/IP
16 = VI
32 = FICON