HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

38 FibreAlliance MIB objects
connUnitLinkPortWwnY
OID 1.3.6.1.3.94.1.12.1.8
Description The port WWN on the unit specified by connUnitLinkNodeIdY, if known; otherwise, 16
octets of binary 0.
Note For an ISL, the value is the WWN of the remote port. For a device, the value is the port
name.
connUnitLinkAgentAddressY
OID 1.3.6.1.3.94.1.12.1.9
Description The address of an FCMGMT MIB agent for the node identified by connUnitLinkNodeIdY,
if known; otherwise, 16 octets of binary 0.
Note This displays (zero-length) for devices and hosts.
connUnitLinkAgentAddressTypeY
OID 1.3.6.1.3.94.1.12.1.10
Description If connUnitLinkAgentAddressY is nonzero, it is a protocol address.
ConnUnitLinkAgentAddressTypeY is the address family number assigned by IANA to
identify the address format (for example, 1 is Ipv4; 2 is Ipv6).
Note This displays 1 for the devices connected to an E_Port and Ex_Port.
This displays 0 for the devices and hosts connected to an F_Port, FL_Port, and iSCSI port.
connUnitLinkAgentPortY
OID 1.3.6.1.3.94.1.12.1.11
Description The IP port number for the agent. This is provided in case the agent is at a non-standard
SNMP port.
Note This displays 161 for the devices connected to an E_Port and Ex_Port.
This displays 0 for the devices and hosts connected to an F_Port, FL_Port, and iSCSI port.
connUnitLinkUnitTypeY
OID 1.3.6.1.3.94.1.12.1.12
Description The type of the Fibre Channel connectivity unit as defined in connUnitType:
• ISL: Switch device.
• End devices: End device types based on an FCP Inquiry.
Note HP does not support hubs.
connUnitLinkConnIdY
OID 1.3.6.1.3.94.1.12.1.13
Description This is the Fibre Channel ID of this port. If the connectivity unit is a switch, this is expected
to be a Big Endian value of 24 bits. If this is a loop, it is the ALPA that is connected. If this
is an E_Port, it contains only the domain ID. If this is not any of these, it is unknown or a
cascaded loop; all bits are set to 1.
Note For an ISL, the value is the Port ID of the remote port. For a device, the value is the Port ID
of the remote port.
This displays DomainId port number 00 for devices connected to E_Port and Ex_Port.
This displays the PID value for devices and hosts connected to F_Port and FL_Port.
This displays 00 00 00 for devices connected to VE_Port.
This displays FFFFFF for devices connected to iSCSI port.