HP StorageWorks XPath OS 7.4.X MIB Reference Guide (AA-RVHEC-TE, September 2005)

XPath OS 7.4.x MIB reference guide 39
connUnitLinkCurrIndex
OID 1.3.6.1.3.94.1.12.1.14
Description The most recently used link index.
trapMaxClients
OID 1.3.6.1.3.94.2.1
Description The maximum number of SNMP trap recipients supported by the connectivity unit.
Note The maximum number of SNMP trap recipients supported is 6.
trapClientCount
OID 1.3.6.1.3.94.2.2
Description The current number of rows in the trap table.
trapRegTable
OID 1.3.6.1.3.94.2.3
Description A table containing a row for each IP address/port number that traps are sent to.
trapRegEntry
OID 1.3.6.1.3.94.2.3.1
Description A row for each IP address/port number that traps are sent to.
trapRegIpAddress
OID 1.3.6.1.3.94.2.3.1.1
Description The IP address of a client registered for traps.
trapRegPort
OID 1.3.6.1.3.94.2.3.1.2
Description The UDP port to send traps to for this host. Normally this would be the standard trap port (162).
This object is an index and must be specified to create a row in this table.
Note This MIB object always returns the value 162.
trapRegFilter
OID 1.3.6.1.3.94.2.3.1.3
Description This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that
have a severity level less than or equal to this value. The default value of this object is
warning.
Note This MIB object is implemented as a read-only variable instead of a read-write variable,
as defined in the MIB.
trapRegRowState
OID 1.3.6.1.3.94.2.3.1.4
Description Specifies the state of the row.
Note This MIB object is implemented as a read-only variable instead of a read-write variable,
as defined in the MIB. It returns the row-active(3) for all the trap entries.