Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 127
53-1000437-01
FCR-1038
20
Recommended
Action
No action is required.
Severity INFO
FCR-1038
Message <timestamp>, [FCR-1038], <sequence-number>,, WARNING, <system-name>, Total zone
entries exceeded local fabric limits by <overflow> entries, in zone: <zone name>,
zone limit: <LSAN zone limit>.
Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the
local switch's zone database limitations.
Recommended
Action
Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN)
zones created is within the range of the local database limitations.
Severity WARNING
FCR-1039
Message <timestamp>, [FCR-1039], <sequence-number>,, INFO, <system-name>, Local LSAN zone
<zone name> device entries for backbone LSAN exhausted.
Probable Cause Indicates that the number of devices in the specified logical storage area network (LSAN) defined
in the backbone fabric is greater than allowed by the local LSAN zone database limitations.
Recommended
Action
Remove excess device entries from this LSAN zone until the number of devices is within the range
of the local LSAN zone database limitations.
Severity INFO
FCR-1040
Message <timestamp>, [FCR-1040], <sequence-number>,, INFO, <system-name>, Proxy device
deleted in the backbone fabric.
Probable Cause Indicates that a proxy device created in the backbone fabric was deleted.
Recommended
Action
No action is required.
Severity INFO
FCR-1041
Message <timestamp>, [FCR-1041], <sequence-number>,, INFO, <system-name>, LSAN zone
device removed in the backbone fabric.