Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 283
53-1000437-01
Chapter
43
LOG System Messages
LOG-1000
Message <timestamp>, [LOG-1000], <sequence-number>,, INFO, <system-name>, Previous
message repeated
<repeat count> time(s)
Probable Cause Indicates that the previous message repeated the specified number of times.
Recommended
Action
No action is required.
Severity INFO
LOG-1001
Message <timestamp>, [LOG-1001], <sequence-number>, FFDC, WARNING, <system-name>, A log
message was dropped
Probable Cause Indicates that a log message was dropped. A trace dump file is created.
Recommended
Action
Run the reboot command for nonbladed switches or the haFailover command on bladed switches.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
LOG-1002
Message <timestamp>, [LOG-1002], <sequence-number>, FFDC, WARNING, <system-name>, A log
message was dropped
Probable Cause Indicates that a message was not recorded by the error logging system. A trace dump file is
created. The message might still be visible through SNMP or other management tools.
Recommended
Action
Run the reboot command for nonbladed switches or the haFailover command on bladed switches.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING