Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

Fabric OS Message Reference 449
53-1000437-01
ZONE-1022
77
ZONE-1022
Message <timestamp>, [ZONE-1022], <sequence-number>,, INFO, <system-name>, The effective
configuration has changed to <Effective configuration name>. <AD Id>
Probable Cause Indicates that the effective zone configuration has changed to the name displayed.
Recommended
Action
Verify that this zone configuration change was done on purpose. If the new effective zone
configuration is correct, no action is necessary.
Severity INFO
ZONE-1023
Message <timestamp>, [ZONE-1023], <sequence-number>,, INFO, <system-name>, Switch
connected to port (
<port number>) is busy. Retry zone merge.
Probable Cause Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the
other side of the port is busy.
Recommended
Action
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO
ZONE-1024
Message <timestamp>, [ZONE-1024], <sequence-number>,, INFO, <system-name>, <Information
message>.
Probable Cause Indicates that the cfgSave command ran successfully. The <Information message> is “cfgSave
completes successfully.”
Recommended
Action
No action is required.
Severity INFO