Brocade Fabric OS Message Reference - Supporting Fabric OS v5.3.0 (53-1000437-01, June 2007)

28 Fabric OS Message Reference
53-1000437-01
AG-1011
2
AG-1011
Message <timestamp>, [AG-1011], <sequence-number>,, WARNING, <system-name>, Sending FDISC
failed on N_Port <port>.
Probable Cause Indicates failure of sending the discover F_Port service parameter request from the Access
Gateway to the fabric switch.
Recommended
Action
Please check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
AG-1012
Message <timestamp>, [AG-1012], <sequence-number>,, WARNING, <system-name>, Sending
logout(LOGO)request failed on N_Port <port>.
Probable Cause Failure sending N_Port logout request from the Access Gateway to the fabric switch.
Recommended
Action
Please check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
AG-1013
Message <timestamp>, [AG-1013], <sequence-number>,, INFO, <system-name>, F_Ports mapped
to N_Port <port> failed over to other N_Port(s).
Probable Cause Indicates that the specified N_Port is failing over to other N_Port(s) connected to the same fabric.
Recommended
Action
Run the ag --mapShow command to display updated F_Port to N_Port mapping.
Severity INFO
AG-1014
Message <timestamp>, [AG-1014], <sequence-number>,, INFO, <system-name>, Failing back
F_Ports mapped to N_Port <port>.
Probable Cause Indicates that the specified N_Port is failing back F_Ports mapped to the specified N_Port.
Recommended
Action
Run the ag --mapShow command to display updated F_Port to N_Port mapping.