Brocade Fabric OS Message Reference Supporting Fabric OS v6.0.0 (53-1000600-01, October 2007)

130 Fabric OS Message Reference
53-1000600-01
FICN-1018
22
Probable Cause The FICON Control Unit sent a LPE frame to the FICON channel.
Recommended
Action
This is an informational message and does not require any action.
Severity INFO
FICN-1018
Message <timestamp>, [FICN-1018], <sequence-number>,, ERROR, <system-name>, DevIng:FCUB
Lookup failed for Path=<FICON PATH>.
Probable Cause The FICON Control Unit sent a frame that cannot be associated with a FICON Control Unit CUADDR.
Recommended
Action
Please contact your vendor's customer support for assistance.
Severity ERROR
FICN-1019
Message <timestamp>, [FICN-1019], <sequence-number>,, ERROR, <system-name>, DevTapeEgr:AS
Link Level Reject (LRJ) from Chan on Path=<FICON PATH> LastCmd=0x<the Last 4
commands issued to the device> LastStatus=0x<the Last 4 status values received
from the device>.
Probable Cause The FICON channel indicated in the path issued a LRJ frame for a sequence from the device.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity ERROR
FICN-1020
Message <timestamp>, [FICN-1020], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Cancel received Path=<FICON PATH> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tape control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Probable Cause The FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, please contact your vendor's
customer support for assistance.
Severity ERROR