Brocade Fabric OS Message Reference Supporting Fabric OS v6.0.0 (53-1000600-01, October 2007)

Fabric OS Message Reference 137
53-1000600-01
FICN-1044
22
Probable Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset.
Recommended
Action
If this was an unexpected event, please contact your vendor's customer support for assistance.
Severity ERROR
FICN-1044
Message <timestamp>, [FICN-1044], <sequence-number>,, ERROR, <system-name>,
HostTapeIng:FICON Selective Reset:Path=<FICON PATH> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Probable Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset.
Recommended
Action
If this was an unexpected event, please contact your vendor's customer support for assistance.
Severity ERROR
FICN-1045
Message <timestamp>, [FICN-1045], <sequence-number>,, WARNING, <system-name>,
HostTapeIng:FICON Purge received:Path=<FICON PATH>.
Probable Cause Purge path received from the locally connected FICON channel. This is performed during the path
recovery.
Recommended
Action
If this was an unexpected event, please contact your vendor's customer support for assistance.
Severity WARNING
FICN-1046
Message <timestamp>, [FICN-1046], <sequence-number>,, WARNING, <system-name>,
HostTapeIng:LRJ received on Path=<FICON PATH> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Probable Cause An LRJ from a FICON channel indicates that the channel believes that it no longer has a path
established to the CU.
Recommended
Action
This is normally an unexpected event, please contact your vendor's customer support for
assistance.
Severity WARNING