Brocade Fabric OS Message Reference Supporting Fabric OS v6.0.0 (53-1000600-01, October 2007)

Fabric OS Message Reference 183
53-1000600-01
FW-1126
29
FW-1126
Message <timestamp>, [FW-1126], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of segmentations has fallen below the low boundary. Segmentation
changes might occur due to:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
A low number of segmentation errors means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1127
Message <timestamp>, [FW-1127], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of segmentations has risen above the high boundary. Segmentation
changes might occur due to:
• Zone conflicts.
• Domain conflicts.
• Segmentation of the principal link between two switches.
• Incompatible link parameters. During E_Port initialization, ports exchange link parameters.
Rarely, incompatible parameters result in segmentation.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO