Brocade Fabric OS Message Reference Supporting Fabric OS v6.0.0 (53-1000600-01, October 2007)

Fabric OS Message Reference 29
53-1000600-01
AG-1015
2
Severity INFO
AG-1015
Message <timestamp>, [AG-1015], <sequence-number>,, WARNING, <system-name>, Unable to
find online N_Ports to connect to the fabric.
Probable Cause Either no other N_Port is configured or all N_Ports are currently offline.
Recommended
Action
Please check whether or not any other N_Port is configured.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
AG-1016
Message <timestamp>, [AG-1016], <sequence-number>,, INFO, <system-name>, Failing over
F_Ports mapped to N_Port <port> to other N_Port(s).
Probable Cause Indicates that the specified N_Port has failed to come online. All F_Port(s) mapped to this N_Port
are being failed over to other active N_Port(s).
Recommended
Action
Run the ag --mapShow command to display updated F_Port to N_Port mapping.
Severity INFO
AG-1017
Message <timestamp>, [AG-1017], <sequence-number>,, WARNING, <system-name>, No N_Port(s)
are currently Online.
Probable Cause Indicates that no N_Port(s) are currently configured in the system or all configured N_Port(s) have
failed to come online.
Recommended
Action
Run switchShow to display the status of all ports in the system. Run portCfgShow to display a list of
ports currently configured as N_Port(s).
Severity WARNING
AG-1018
Message <timestamp>, [AG-1018], <sequence-number>,, ERROR, <system-name>, Host port
should not be connected to port <port>, which is configured as N_Port.
Probable Cause Indicates that Initiator/Target is erroneously connected to a port configured for N_Port operation.