HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)
Multi-protocol router installation guide 23
2 Installation, setup, and login
This chapter provides the following information:
• Unpacking and verifying carton contents, page 23
• Locating MP Router serial numbers, page 23
• Carton contents checklist, page 24
• Installation guidelines, page 25
• Installation time and items required, page 26
• Setting up the MP Router as a stand-alone unit, page 27
• Installing the MP Router in a rack using the SAN Switch Rack Mount Kit, page 28
• Connecting AC power, page 37
• Power On Self-Test, page 38
• Recommendations for cable management, page 40
• Installing SFP transceivers, page 40
• Logging into the MP Router via a serial connection, page 41
Unpacking and verifying carton contents
Unpack and inspect the MP Router carton contents as follows.
1. Inspect the shipping carton for possible damage caused during transmit.
2. Unpack the shipping carton.
3. Verify that the carton contains the items listed in Table 5.
NOTE: If any items are damaged or missing, please contact HP or an authorized HP reseller.
Locating MP Router serial numbers
For tracking purposes, locate the MP Router serial numbers on the rear panel, near the fan
assemblies. Store in a safe location. Serial numbers are required if you need to contact HP technical
support.