HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)
Installation, setup, and login24
Carton contents checklist
Table 5 Shipping carton contents
Item Description
1 One MP Router populated with two power supplies and two fan
assemblies
2 An MP Router product accessories box containing:
• One RS-232 serial cable; can be converted from a DB-9 to a
RJ-45 connector, by removing the adapter on the end of the
cable
• Pouch containing rack mount hardware:
• (14) #8-32 x 3/16-inch Phillips pan-head screw with
thread lock for the SAN Switch 2/32 only
• (14) 8-32 x 5/16-inch Phillips pan-head SEMS screw for
use with the MP Router, SAN Switch 2/8, SAN Switch
2/8V, SAN Switch 2/16, SAN Switch 2/16V, or SAN
Switch 2/16N
• (10) #10-32 x 1/2-inch Phillips pan-head screw with
captive star lock washer
• (8) #10 alignment washer
• (8) #10 adapter washer
• (2) 1/4-20 hex nut with captive star lock washer
• (2) 1/4-inch flat washer
•
Documentation, license, warranty, and HP StorageWorks
Multi-protocol Router Documentation CD/XPath OS 7.4.x
(all documents referenced in this document reside on this CD)
• Two country-specific AC power cords
• Two Power Distribution Unit (PDU) power cords
• Four rubber mounting feet for stand-alone installations on a
table or lab bench
3 SAN Switch Rack Mount Kit:
• Two rear mounting brackets
• A right inner rail and a right outer rail
• A left inner rail and a left outer rail