HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 29
CAUTION: For proper air flow, the SFP media side of the MP Router must face the rear of the rack.
This mounting allows air to enter from the front of the rack and to exhaust at the rear of the rack,
similar to other rack-mounted equipment. This prevents overheating, which can cause failures.
To install the router in a rack:
1. Check the contents of the shipping carton to verify that all the required parts and hardware are
available.
2. Choose a mounting location in the rack for the router.
3. Attach the rear mounting brackets to the rear rack uprights by completing one of the following
steps:
(8) #10 alignment washers
(8) #10 adapter washers
(2) 1/4-20 hex nuts with captive star lock
washers
(2) 1/4-inch flat washers
Table 7 Rack Mount Kit rails and rail mounting hardware (continued)
Item Description