HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 33
b. Depending on the rack you are using, complete one of the following tasks:
• For an HP 10000 series rack, install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 adapter washers in the upper and lower hole
locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 adapter washers in the upper and lower hole
locations of the left rail, as shown in Figure 6.
Figure 6 Assembling the outer rails