HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Installation, setup, and login34
• For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 alignment washers in the upper and lower hole
locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washers and two #10 alignment washers in the upper and lower hole
locations of the left rail, as shown in Figure 7.
Figure 7 Assembling the outer rails (HP System/e Rack)
CAUTION: Do not use any screws other than the fourteen that are provided. Using longer screws
can cause damage to internal components.