HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Installation, setup, and login42
7. When the terminal emulator application stops reporting information, press Enter.
8. Log in to the MP Router as admin. The default password is password.
At the initial login, you are prompted to enter your own personal admin and user passwords.
9. Modify passwords, if desired.
Passwords can be 8 to 40 characters and should include a combination of numbers and upper
and lowercase letters
. To skip this step, press Ctrl-C.
Example
See ”Setting initial parameters” on page 43 to finish configuring the MP Router.
XPath OS
Switch login: admin
Password:
Please change your passwords now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
Switch:admin>