HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 47
Example
Synchronizing the local FCS switch to an external NTP server
To synchronize the local time of the Primary FCS switch to an external NTP server, follow these steps.
1. Log in as admin.
2. Enter the tsclockserver [ipaddr] command.
NOTE: ipaddr is the IP address of the NTP server. The IP address specified should be the IP
address of an NTP server and should be accessible from the router. This operand is optional; by
default this value is LOCL.
Example
APswitch:admin> timezoneset
Please select a continent or ocean
1). Africa 2). America 3). Antarctica 4). Arctic Ocean
5). Asia 6). Atlantic Ocean 7). Australia 8). Europe
9). Indian Ocean 10). Pacific Ocean 11). US 12). Canada
Enter the option #: 11
Please select a country or city
1). Alaska 2). Aleutian 3). Arizona 4). Central
5). East-Indiana 6). Eastern 7). Hawaii 8). Indiana-Starke
9). Michigan 10). Mountain 11). Pacific 12). Pacific-New
13). Samoa
Enter the option #: 12
time zone is set
APswitch:admin>
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver "132.163.135.131"
switch:admin> tsclockserver
132.163.135.131
switch:admin>