HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 49
Example
Adding a license
Contact your HP-authorized reseller to purchase license keys for optional features. A license key is a
string of approximately 16 uppercase and lowercase letters and digits.
Your HP representative requires the MP Router’s World Wide Number (WWN) in order to assign a
license key. Enter the switchshow command to obtain the WWN of your MP Router.
After obtaining the license key, use these steps to add a license.
1. Log in to the MP Router as admin.
2. Enter the licenseadd command, followed by the license key enclosed in quotation marks.
NOTE: Enter the license key into the system exactly as issued. If you enter it incorrectly, the license
will not function properly.
Example
3. Use the licenseshow command to check to see whether the license is valid.
If a licensed product is not displayed, the license is invalid.
NOTE: After you enter a license, the licensed product is available immediately. The system does
not require a reboot.
APswitch:admin> licenseshow
License Key: bQebzeRdScRfc0iK
Web
License Key: SybbzQQ9edTzcd0X
Zoning
License Key: SybbzQQ9edTzcc0X
Trunking
License Key: cSzbbcdyQbdb0csv
FCIP
APswitch:admin>
APswitch:admin> licenseadd "bQebzbRdScRfc0iK"
License key bQebzbRdScRfc0iK added