HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Monitoring the MP Router52
Port side LEDs
The LEDs on the port side of the MP Router provide information about the overall system status, the
Fibre Channel ports, the management ports, and the power supplies as shown in Figure 11 and
Table 9.
The LED patterns might temporarily change during POST and other diagnostic tests. For information
on interpreting LED patterns, see the following sections:
• System status LEDs—port side, page 53
• Multi-protocol port LEDs, page 54
• Management port LEDs, page 55
• Power supply LEDs, page 55
Figure 11 Port side LEDs
Table 9 Port side LEDs descriptions
Item Component
1
System status LEDs
2
Port status LEDs
3
Management port LEDs
4
Power supply 1 status LEDs
5
Power supply 2 status LEDs
0
SPEED
LINK SPEED
ACTIVITY
MGMT2 MGMT1 CONSOLE
FC/GbE
LINK/ACT
POWER
PORTS
SYSTEM
123456789101112131415
DC
OK
AC
OK
100-240 VAC 6.0 A 47-63 Hz
DC
OK
AC
OK
100-240 VAC 6.0 A 47-63 Hz
POWER
PORTS
SYSTEM
9
DC
OK
AC
OK
DC
OK
AC
OK
MGMT2
1
2
3
4 5
MRO25005a