HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 53
System status LEDs—port side
The system status LEDs on the port side of the MP Router indicate system status. See Table 10 for a
description of the system status (port side) LEDs.
There are also system status LEDs on the nonport side of the MP Router.
Table 10 System status LEDs (port side)
LED Label LED color Indication
System Off System initializing (or power is off).
Green System status is good.
Yellow System or FRU fault(s) detected.
Yellow (blinking) Beacon is on.
Ports Off System initializing (or power is off).
Green Port status is good.
Yellow Port fault(s) detected.
Power Green Power is on.