HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Monitoring the MP Router60
marginal or down, the overall status of the MP Router is also displayed as marginal or down. If all
components have a healthy status, the MP Router appears a healthy status.
The rules used to classify the health of each component are in the Configured foruration files, as
shown in Table 18. To change the rules, use the Configured forupload and Configured
fordownload commands to access the Configured foruration files and edit them manually.
Use these steps to view the overall status of the MP Router.
1. Log in to the MP Router as admin.
2. Enter the switchstatusshow command.
Example
Port status
Use these steps to view the status of a port.
1. Log in to the MP Router as admin.
2. Type the portshow command, followed by the number that corresponds to the port you are
troubleshooting.
Table 18 Component status rules
Component # Failures Status
Fan 1 Marginal
>1 Down
Power 1 Marginal
2Down
Temperature
sensor
2Marginal
>2 Down
APswitch:admin> switchstatusshow
Switch overall status: Marginal
Reason:
power supply is in MARGINAL state
Power overall status: Marginal
Fan overall status: Healthy
Temp overall status: Healthy
APswitch:admin>