HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Multi-protocol router installation guide 61
Example
Fan status
Use these steps to display the status of the fans:
1. Log in to the router as admin.
2. Enter the fanshow command.
Example
Possible status values include:
• OK—Fan is present and functioning correctly.
• NOT PRESENT—Fan is not present.
• FAIL—Fan is present but faulty.
APswitch:admin> portshow 2
port 2 info
Configured foruration Current
Name : port 2
State: STARTED UP
Type : FC FC
Link Status: ENABLED DOWN
Topology: P-P P-P
Speed: AN AN
LinkCost: AUTO
WWN: 20:02:00:05:1e:12:f2:00
Licensed : YES
Diag result : PASSED
inFrames: 0
outFrames: 0
inOctets: 0
outOctets: 0
discards: 0
APswitch:admin>
APswitch:admin> fanshow
Fan 1 Status: OK Set_Speed: NORMAL Actual_speed: 7010 RPM
Fan 2 Status: OK Set_Speed: NORMAL Actual_speed: 7180 RPM
Fan 3 Status: OK Set_Speed: NORMAL Actual_speed: 7068 RPM
Fan 4 Status: OK Set_Speed: NORMAL Actual_speed: 7116 RPM
Fan 5 Status: OK Set_Speed: NORMAL Actual_speed: 7155 RPM
Fan 6 Status: OK Set_Speed: NORMAL Actual_speed: 7001 RPM
APswitch:admin>