HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)

Replacing FRUs74
3. Remove the SFP module according to the manufacturer’s instructions or as shown in Figure 15.
Figure 15 Replacing an SFP
4. Position the replacement SFP so that it is oriented correctly, and insert it into a port until it is
firmly seated and the latching mechanism clicks.
SFPs are keyed to ensure correct orientation. If one does not install easily, check the orientation.
For instructions specific to the type of SFP, see the manufacturer’s documentation.
SFP
4
SFP
Bale
3
2
Cable
Release
1
25051a