HP StorageWorks Multi-protocol Router Installation Guide (A7437-96003, September 2005)
Multi-protocol router installation guide 77
A Technical specifications
This appendix lists MP Router product specifications, including:
• System architecture, page 77
• Chassis dimensions, page 78
• Power specifications, page 78
• Environmental specifications, page 79
System architecture
Table 24 describes the MP Router system architecture.
Table 24 System architecture
Feature Description
Dual-mode ports 16 ports, Fibre Channel (E, F) and Gigabit Ethernet
Router
interoperability
See the product Release Notes for the most up-to-date Fibre Channel
switch compatibility information. This information is also provided in the
HP StorageWorks SAN Design Reference Guide
available on the web at:
http://h18006.www1.hp.com/products/storageworks/sa
n/documentation.html
Performance 1.063 Gb/s line speed, full duplex; 2.125 Gb/s line speed, full
duplex; auto-sensing of 1 Gb/s and 2 Gb/s port speeds; optionally
programmable to fixed port speed; speed matching between 1 Gb/s
and 2 Gb/s ports
Aggregate
bandwidth
42 Gb/s end-to-end
Fabric latency Storage application dependent
Maximum size frame 2112-byte payload FC; 1518-byte payload Gigabit Ethernet
Classes of service Class 3
Port types FL_Port (restricted), F_Port, and E_Port; self-discovery based on switch
type (U_Port); Gigabit Ethernet
Media types Small form-factor pluggable (SFP) laser; short-wave up to 500 m (1,640
feet); long-wave up to 10 km (6.2 miles), extended long-wave up to 25
km (15.5 miles)
Fabric services Simple Name Server; Registered State Change Notification (RSCN);
optional fabric services, including Advanced Zoning, Exchange-Based
Trunking, and Advance Web Tools, plus Fibre Channel Routing and
FCIP