Quick Start Guide hp StorageWorks NAS 1000s First Edition (January 2004) Part Number: 338705-002 This Quick Start guide provides information for deploying the HP StorageWorks NAS 1000s.
© Copyright 2004 Hewlett-Packard Development Company, L.P. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Contents Contents About this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Conventions. . . . . . . .
Storage Management Elements . . . . . . . . . . . . . . . . . . . . . . . . .23 Logical Storage Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Persistent Storage Management Elements . . . . . . . . . . . . . . . . .24 Snapshot Facts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 File System Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 File-Sharing Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BSMI Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Battery Replacement Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 B Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Grounding Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Index . . . . . . . . . . . . . . . . .
NAS 1000s Quick Start Guide
About this Guide About this Guide This quick start guide provides information to help you deploy the HP StorageWorks NAS 1000s.
Overview This section covers the following topics: ■ Intended Audience ■ Prerequisites ■ Related Documentation Intended Audience This book is intended for use by technical professionals who are experienced with the following: ■ Microsoft® administrative procedures ■ File-sharing protocols Prerequisites Before you set up the NAS 1000s, HP recommends that the reader obtain supplemental documentation relative to the items listed above in the section titled Intended Audience.
Conventions Conventions consist of the following: ■ Document Conventions ■ Text Symbols ■ Equipment Symbols Document Conventions The document conventions included in Table 1 apply in most cases.
Text Symbols The following symbols may be found in the text of this guide. They have the following meanings. WARNING: Text set off in this manner indicates that failure to follow directions in the warning could result in bodily harm or death. Caution: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or data. Note: Text set off in this manner presents commentary, sidelights, or interesting points of information.
Any RJ-45 receptacle marked with these symbols indicates a network interface connection. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into this receptacle. Any surface or area of the equipment marked with these symbols indicates the presence of a hot surface or hot component. Contact with this surface could result in injury.
Rack Stability Rack stability protects personal and equipment. WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: ■ The leveling jacks are extended to the floor. ■ The full weight of the rack rests on the leveling jacks. ■ In single rack installations, the stabilizing feet are attached to the rack. ■ In multiple rack installations, the racks are coupled. ■ Only one rack component is extended at any time.
Be sure to have the following information available before calling: ■ Technical support registration number (if applicable) ■ Product serial numbers ■ Product model names and numbers ■ Applicable error messages ■ Operating system type and revision level ■ Detailed, specific questions HP Storage Website The HP website has the latest information on this product, as well as the latest drivers. Access storage at: http://www.hp.com. From this website, select the appropriate product or solution.
NAS 1000s Quick Start Guide
Product Overview 1 This chapter describes the configuration options and setup and configuration dependencies and requirements for the HP StorageWorks NAS 1000s. Configuration Options The NAS 1000s is specifically designed for file serving; it offers optimized performance for a growing environment.
Product Definition and Information The NAS 1000s is a business class NAS solution that provides reliable performance, manageability, and fault tolerance. Server Hardware Features The following features are included in the NAS 1000s Model 1 server: ■ Intel Pentium 4 2.
The following features are included in the NAS 1000s Model 3 server: ■ Intel Pentium 4 2.
For specific software product recommendations, go to the HP website: http://h18000.www1.hp.com/products/storageworks/nas/support edsoftware.html Managing the NAS 1000s The NAS 1000s is configured at the factory with default system settings and with the NAS operating system installed. Refer to the “Storage Management Overview” section later in this chapter for more information. The NAS administrator uses Windows Logical Disk Manager (LDM) to manage the logical storage.
Product Redundancy The NAS 1000s is specifically designed to perform file serving tasks for networks, using industry standard components to ensure reliability. Other industry standard features, such as redundant array of independent drives (RAID) and remote manageability, further enhance the overall dependability of the NAS 1000s. To ensure redundancy and reliability, the hard drives installed in the NAS 1000s are configured so that a single drive failure will not cause data loss or system failure.
Dependencies and Requirements Specific conditions must be met in order for the NAS 1000s to operate. Storage Requirements To protect against data loss from hard drive failure, configure storage with fault tolerance in mind. HP recommends adhering to RAID5 configurations. IP Networking and Setup Requirements The following are IP networking and setup requirements needed for a NAS 1000s device: ■ Windows-based PC running Microsoft Internet Explorer 5.
1 2 3 10 9 4 5 8 7 6 Figure 2: Rear panel connectors Table 2: Rear Panel Connectors Item Description 1 Power connectors 2 Mouse connector (PS/2) (green) 3 Video connector (blue) 4 Serial connector (teal) 5 PCI expansion slot 6 LVD SCSI Controller connector 7 RJ-45 connector for NIC 1 (Eth0) 8 RJ-45 connector for NIC 1 (Eth1) 9 USB connectors (2) (black) - Keyboard connector (PS/2) (purple) NAS 1000s Quick Start Guide 21
Setup and Configuration Overview Setting up systems is a well-defined process. This section is intended as an overview of the process, not a detailed list of step-by-step instructions. Step-by-step procedures are documented in the administration guide. Some of the steps are driven by wizards within the WebUI. In either type of setup, it is important to read all of the supplied documentation before starting.
Storage Management Overview This section provides an overview of the components that make up the NAS storage structure. A complete discussion of the components and their relationships is available in the administration guide. Caution: This section on storage management and Windows LDM is required reading material for the NAS administrator. This section develops the concepts and requirements that serve as the basis for successfully using an HP StorageWorks NAS device.
Persistent Storage Management Elements Persistent Storage Manager lets the administrator make replicas of disks, called snapshots. Snapshots enable the creation of multipurpose logical replicas of production data without having to physically copy the data. They can be used to immediately recover a lost file or directory, to test a new application with realistic data without affecting the “real” data, and to serve as a source of data for backups.
File System Elements File system elements are composed of the folders and subfolders that are created under each logical storage element (partitions, logical disks, and volumes). Folders are used to further subdivide the available file system providing another level of granularity for management of the information space. Each of these folders can contain separate permissions and share names that can be used for network access. Folders can be created for individual users, groups, projects, etc.
NAS 1000s Quick Start Guide
Before You Begin 2 This chapter describes the preinitialization and configuration tasks required for the HP StorageWorks NAS 1000s. Preinitialization Before beginning the installation process, verify that the hardware installation is complete. Verify that the NAS 1000s is completely installed in the rack and that all cables and cords are connected. The setup utility documented here and in the next section only provide basic setup for the network components of the NAS 1000s.
Configuration Information Collect the general information required to initialize the NAS device for both dynamic host configuration protocols (DHCP) and non-DHCP configurations. You will be asked for this information during configuration, as shown in Table 3. Become familiar with this information before attempting to configure the NAS device.
Configuration Setup 3 This chapter provides information about configuring the HP StorageWorks NAS 1000s using the online method. Before completing the tasks in this chapter, verify that the NAS 1000s is installed in the rack and that all cables and cords are connected. It is also necessary to collect certain information required during the configuration process, as mentioned in Chapter 2, “Before You Begin.
WebUI Configuration The NAS 1000s includes a WebUI that is designed to be a graphical, easy-to-use application that gathers the necessary information for configuration. The WebUI may be accessed locally or by host name. Note: Configure the NAS 1000s locally when deploying the device in a non-DHCP environment.
Remote Access Method (Using Hostname) The NAS 1000s ships by default with DHCP enabled on the network port. If the system is placed on a DHCP serviced network and the serial number of the device is known, it can be accessed through a client running Microsoft Internet Explorer 5.5 (or later) on that network, using the 3201 port of the device. The serial number is located on the product ID label.
Figure 4: Rapid Startup wizard screen 4. Open Internet Explorer on the Windows-based PC. Enter http://, the serial number of the NAS 1000s followed by a hyphen (-), followed by :3201. Press Enter. This launches the WebUI configuration application (Rapid Startup) on the target HP StorageWorks NAS device as shown in Figure 4. Example: http://D4059ABC3433-:3201 Note: The NAS device will respond when the NAS operating system has started. 5. Using the information from Table 4, fill in the screens that follow.
Figure 5: Rapid Startup configuration review screen 6. Click the Finish icon to exit Rapid Startup. Close the browser window. The NAS 1000s will now reboot to set the configuration information. Direct Access Method (Using the Console) To initialize the NAS 1000s using the WebUI configuration application: 1. Logon locally using the username administrator. No password is needed. 2. Open Internet Explorer on the Windows-based PC. The browser will default to the Rapid Startup Wizard screen. 3.
Completing the System Configuration After the configuration process, there are additional tasks required in order to begin sharing files on the network. All procedures for the configuration tasks may be found in the HP StorageWorks NAS 1000s Administration Guide.
Hot-Plug Hard Drive 4 This chapter provides information about replacing the hot-pluggable hard drives of the HP StorageWorks NAS 1000s. Important Guidelines for Replacing Hot-Pluggable Hard Drives Follow these guidelines when replacing drives configured for fault tolerance on an HP StorageWorks NAS 1000s: ■ Never remove more than one drive at a time. When a drive is replaced, the controller uses data from the other drives in the array to reconstruct data on the replacement drive.
Before You Begin Before replacing a hot-pluggable hard drive: ■ Verify correct drive carrier support Refer to the documentation included with the system. ■ Review important guidelines When replacing a failed drive, refer to the documentation included with the server to identify and remove a failed drive. See “Important Guidelines for Replacing Hot-Pluggable Hard Drives” earlier in this chapter.
Replacing a Failed Hard Drive Follow these steps to install the hot-pluggable hard drive into the system. 1. Remove the NAS 1000s front bezel. a. Locate the two bezel latches found on the side of the bezel. Pull the latches outward. b. Pull the front bezel away from the unit. 2. Remove a hard drive from the disk enclosure before installing a new hard drive. a. Press the ejector button and pivot the lever to full open position. b. Pull the drive from the disk enclosure. 3.
Figure 6: Disk Management screen Ensure the appropriate disk is selected when the Upgrade to Dynamic Disk dialog box is displayed. Figure 7: Upgrade to Dynamic Disk dialog box d. Remove the mirror on the Missing disk. Right-click the Operating System Partition, C: in this example, on the Missing disk and select Remove Mirror. In the Remove Mirror dialog box, select the Missing disk and click Remove Mirror as shown in Figure 8.
Figure 8: Remove Mirror dialog box e. The Mirror should now be removed from the Missing disk as show in Figure 9. Figure 9: Mirror removed from Missing disk f. Recreate the Mirror on the new disk. Right-click the Volume, C: on Disk 0 in this example, and select Add Mirror as shown in Figure 10.
Figure 10: Select Add Mirror g. In the Add Mirror dialog box, select the new disk, Disk 1 in this example, to be added into the mirror as shown in Figure 11. Note: If the Disk Management dialog box is displayed regarding making changes to your boot.ini file, click OK to ignore and continue.
h. Repair the data volume. Right-click on the data volume and select Repair Volume as shown in Figure 12. Select the new disk, Disk 1 in this example, in the Repair RAID-5 Volume dialog box as show in Figure 13. Figure 12: Selecting Repair Volume Figure 13: Repair RAID-5 Volume dialog box i. After this procedure, the drives will need some time to regenerate.
j. Do not shutdown or restart the system until the Mirroring of C: or E: is complete. The system can be shutdown while the Data volume is still regenerating, but will have to be restarted once the system comes up. To do this, right-click on the new disk, Disk 1 in this example, and select Reactivate Disk as shown in Figure 14. Figure 14: Selecting Reactive Disk k.
Regulatory Compliance Notices A Federal Communications Commission Notice Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic devices, including computers, generate RF energy incidental to their intended function and are, therefore, covered by these rules.
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at personal expense. Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Declaration of Conformity for products marked with the FCC logo United States only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For questions regarding your product, contact: Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800- 652-6672 For questions regarding this FCC declaration, contact: Hewlett-Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product.
European Union Notice Products bearing the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community and if this product has telecommunication functionality, the R&TTE Directive (1999/5/EC).
BSMI Notice Japanese Notice 48 NAS 1000s Quick Start Guide
Battery Replacement Notice The battery-backed write cache uses a nickel metal hydride (NiMH) battery pack. WARNING: There is a risk of explosion, fire, or personal injury if the battery pack is not properly handled. To reduce this risk: ■ Do not attempt to recharge the batteries if they are disconnected from the controller. ■ Do not expose the battery pack to water, or to temperatures higher than 60ºC (140ºF). ■ Do not abuse, disassemble, crush, or puncture the battery pack.
NAS 1000s Quick Start Guide
Electrostatic Discharge B To prevent damage to the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage, observe the following precautions: ■ Avoid hand contact by transporting and storing products in static-safe containers.
Grounding Methods There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: ■ Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm ± 10 percent resistance in the ground cords. To provide proper grounding, wear the strap snug against the skin. ■ Use heel straps, toe straps, or boot straps at standing workstations.
index A serial 21 USB 21 video 21 conventions document 9 equipment symbols 10 text symbols 10 audience 8 authorized reseller, HP 13 B before you begin 27 C NAS 1000s Quick Start Guide Index D Index cautions data loss 23 file corruption 23 configuration collect information 28 from RapidLaunch CD 29 configuration methods 29 direct access method 33 remote access method 31 WebUI 29 configuration See also configuration tasks 29 configuration setup 29, 35 configuration tasks complete the system configur
F features hardware 16 optional 17 redundancy 19 software 17 G getting help 12 H hard drives handling 36 replacing 37 help, obtaining 12 host configuration protocols, DHCP and nonDHCP 28 hot-plug hard drive replacing 35 HP authorized reseller 13 storage website 13 technical support 12 K keyboard connector 21 M mouse connector 21 N NAS 1000s configuration 29 defined 16 dependencies and requirements 20 deployment 20 setup and configuration overview 22 software features 17 NAS 1000s device, illustrated 18
PCI slot 1 21 PCI slots 2 and 3 21 snapshots effects on virtual disk 24 facts 24 write locality 24 storage management file sharing elements 25 file system elements 25 Logical Storage elements 24 logical storage elements 23 persistent storage management elements 24 storage management and Virtual Replicator 23 storage management overview 23 symbols in text 10 symbols on equipment 10 T table, Ethernet Network Connectors 30 NAS 1000s Quick Start Guide technical support, HP 12 text symbols 10 U USB connector
NAS 1000s Quick Start Guide