HP StorageWorks NAS 1000s Quick Start Guide

28 NAS 1000s Quick Start Guide

Configuration Information

Collect the general information required to initialize the NAS

device for both dynamic host configuration protocols (DHCP)

and non-DHCP configurations. You will be asked for this

information during configuration, as shown in Table 3. Become

familiar with this information before attempting to configure the

NAS device.

Table 3: Configuration Information

Part A: To be completed for DHCP and non-DHCP

configurations

Server Host Name:

Part B: To be completed for non-DHCP configurations

only

DNS Servers IP Address

NAS NIC Port* IP

Address

Subnet

Mask

Gateway

Address

Eth 0

Eth 1

* The default NAS 1000s has two Ethernet ports available for

network connectivity. Disable ports that will not be used. Each

Ethernet port must be configured with a separate subnet.

Part C: SNMP Information (optional)

Trap Destination (IP

Address) Manager Client:

Management Traps

Community String:

System Management

Community String: