HP StorageWorks NAS 1000s Quick Start Guide

30 NAS 1000s Quick Start Guide
WebUI Configuration
The NAS 1000s includes a WebUI that is designed to be a
graphical, easy-to-use application that gathers the necessary
information for configuration. The WebUI may be accessed
locally or by host name.
Note: Configure the NAS 1000s locally when deploying the device
in a non-DHCP environment.
Figure 3: Ethernet connectors
Note: Connect a loopback cable to any of the NAS 1000s Ethernet
ports that are not configured for use.
Table 4: Ethernet Network Connectors
Item Description
1
NIC Ethernet port 1 (Eth 1) used for data
2
NIC Ethernet port 0 (Eth 0) used for data
1 2