HP StorageWorks NAS 1000s Quick Start Guide

32 NAS 1000s Quick Start Guide
Figure 4: Rapid Startup wizard screen
4. Open Internet Explorer on the Windows-based PC. Enter
http://, the serial number of the NAS 1000s followed by a
hyphen (
-), followed by :3201. Press Enter. This launches
the WebUI configuration application (Rapid Startup) on the
target HP StorageWorks NAS device as shown in Figure 4.
Example:
http://D4059ABC3433-:3201
Note: The NAS device will respond when the NAS operating system
has started.
5. Using the information from Table 4, fill in the screens that
follow. Verify that your information is correct when the
configuration review screen is displayed, as shown in
Figure 5.