HP StorageWorks NAS 1000s Quick Start Guide

NAS 1000s Quick Start Guide 33
Figure 5: Rapid Startup configuration review screen
6. Click the Finish icon to exit Rapid Startup. Close the browser
window. The NAS 1000s will now reboot to set the
configuration information.
Direct Access Method (Using the Console)
To initialize the NAS 1000s using the WebUI configuration
application:
1. Logon locally using the username administrator. No
password is needed.
2. Open Internet Explorer on the Windows-based PC. The
browser will default to the Rapid Startup Wizard screen.
3. Using the information from Table 4, fill in the screens that
follow. Verify that your information is correct when the
configuration review screen is displayed, as shown in
Figure 5.
4. Click the Finish icon to exit Rapid Startup. Close the browser
window. The NAS 1000s will now reboot to set the
configuration information.